Description
- Slam function
- Fail secure
- Control with FT 120 Tag-it® Terminal and integrate into a Dialock® access control system
- Flat design allows for mounting beneath or beside drawers
- Electromotive locking mechanism cannot be influenced by magnetic fields
- Integrated contact “Lock closed/open”
- Optional: Additional contact “Locking piece engaged” for door status monitoring
- Mounts with 2 screws (sold separately), and can be oriented in 3 different directions
Application
- Suitable for interior use
- For installation on furniture and office equipment
- Store fixures/display cases
– Roller shutters
– Hinged doors
– Sliding doors
– Flaps
– Drawers
Material
Lock body and locking bolt: Zinc alloy
Finish
Matt
Technical data
Voltage required: | 12V DC± 10% (not polarity sensitive) |
Current Consumption | |
Continuous: | 10 mA |
Peak: | 100 mA for less 40 mS |
Duty cycle rating: | Continuous duty |
Power Consumption: | 0.12 Watt |
Temperature range: | ±4°C to +49° (40°F to 120°F) |
20%~95% RH non condensing | |
Tensile load limit: | |
-Locking bolt | 1000N (225 lbf.) |
Connections: | 3 m (118”) cable |
Min. door width: | 200 mm (7 7/8”), sample installation necessary for narrow door widths |
Note
The mounting plate of the locking piece can be installed against a furniture handle on the opposite side – drilling distance: 32 mm (1 1/4”). Multiple EFL3 locks can be connected to the FT 120 in parallel (keyed alike). Cable is disconnectable and sold separately.
Supplied with
Lock
Lock Bolt
Reviews
There are no reviews yet.